HTPT Power Disk Steam Trap

Performance Advantages

Adopt chrominm=molybdenum-vanadium steel for its valve body.it is corrosion resistance,resistant to wear,heat resistance and longtime useful life.

Suitable for saturated vapour and over heating operation condition without and adjustment in the range of working pressure

Provided with inner Screen,and replace parts on pipeline easily.

Working Principle

With the different thermodynamic property caused by velocity of flow and volume from the steam and condensation water,the disk steam trap drive the hole of the switching valve and realize stopping steam and drain.

Application

Mainly used for high temperature and high pressure pipe and the operation condition whose saturated vapour pressure is 0.5-16MPa

Main basis for type selection

condesation water loading(discharge)kg/h(select the multiplying power 2-3 times)

Maximum working pressure MPa

Operation pressure differential MPa

Valve Material and nominal pressure

Connection mode and dimension

Use and Maintenance

Confirm the valve material pressure and check if the maximum is suitable for operation condition.

Before install,clean the pepeline and clear away sundries

The installation poisition shall be closed to heating equipment as much as possible.

Install the minimum point of pipe horizontally and the direction of flow should be the same to the lable of valve.

Install steam trap for each heating equipment in case cause influence each other.

under the safe operation of system,open the valve in front of the steam trap,make it rise up to normal station slowy.

Do time-based maintenance for the normal working of steam reap.